id: taxi title: Taxi meta: Learn how to taxi in Infinite Flight. order: 6 #
Taxi #
After Start #
Once your engine(s) is/are started and before commencing taxi, the after start checks should be completed:
Step 1
: Set Spoilers to ARMED
Step 2
: Set Trim and Flaps for take-off
Step 3
: Set Autobrake to MAX (if fitted) by accessing the Systems menu and selecting the following:
Misc | Action |
---|---|
Autobrakes | MAX |
{.checklist}
Taxi #
Step 1
: Check surroundings to make sure it is clear, use the Cameras and Mini Map to help you
Step 2
: Request taxi with the active ATC, or if there is no active ATC, announce taxi on the Unicom frequency – listen out whilst you’re on the move for other traffic
Step 3
: Release the Park Brake and increase power to start the taxi
Tip
: We recommend you do not exceed 40% N1 whilst taxiing, and once you’ve started to move, you typically don’t need more than idle power!
Step 4
: Use the Rudder to maintain the taxiway centerline and either the Rud Brakes or Park Brake to keep your speed under control
Tip
: Do not exceed 35kts groundspeed to avoid in-game violations, we recommend you keep your speed below 25kts in a straight line and 10kts or less during 90° turns for a safe operation
Step 5
: If you need to cross a runway whilst taxiing, make sure to request runway crossing with the active ATC, or if there is no active ATC, announce crossing on the Unicom frequency – always check it’s clear before you enter the runway! Don’t forget to access the Systems menu and select the following:
Lights | Action |
---|---|
Strobes | ON |
Land | ON |
{.checklist}
Once you’re clear of the runway, you can turn these lights back to OFF.